How to Replace the Replacement Key Battery For the Saab 9-3
Saab owners have a distinct set of steps to add an additional key. It requires dealer service with an electronic handheld computer called Tech-2. Then a new key and transponder must be purchased and programmed to the car.
Rotate your keys to stop one from deteriorating faster than another. This will keep your keys in perfect condition.
Replacement Case
In contrast to the traditional Saab keys of the past keys, the modern key fobs have electronics inside which makes it difficult to make a copy. This has made car theft considerably more difficult than it was years ago. However, it has also made the replacement of lost keys an incredibly costly endeavor.
Every owner of a Saab 9-3 must have at a minimum two functioning keys. If one gets lost, it costs a lot of money to purchase a new one for the car, as it requires replacing the CIM module and reprogramming the locking cylinders. Dealers usually charge between $100-$200 for this.
There are ways to reduce these costs. Some parts retailers will search for the code on an old key (usually the same one that opens the doors and turns off the ignition) and cut a brand new metal key blade for only a fraction of the dealer's cost. The key must be the exact identical to the original one for it to work in your vehicle.
Follow these steps to replace the case. You'll require an open-faced screwdriver and patience. With the screwdriver, break away the plastic and take out the emergency key. Once the case is open take the electronics out and put them back in the new case. Make sure you insert the correct key and badge back in the case too.
Replacement Battery
The replacement battery for the Saab 9-3 is an affordable component that can be replaced easily and quickly. The YouTube video of Cyclone Cyd demonstrates how you can replace the remote fob battery with just four steps. This tutorial is suitable for any modern saab-type key fob, though the process may vary slightly.
The button is typically located next to the Saab logo on the back of the fob. This is usually located close to the Saab logo on the back of the fob. Use a flathead to insert the screwdriver into the tiny hole on this button. This should be enough to let the fob case open so that you can replace the battery.
After the new battery CR1632 is in place then you can reassemble your remote key fob and then program it to your car. The entire process should not take more than an hour. saab 9-3 key fob replacement is a straightforward procedure that doesn't require special tools.
If you lose your key, the procedure will be a bit more involved, but it can still be accomplished. The dealer has to read the car's VIN and then purchase a replacement key blade and TWICE module, both with the correct unique code. Then, they'll have to cut the new key and then program it using an innovative software tool called MDI.
Replacement Key Fob
The key fob is equipped with a battery that is used to lock and unlock your car. Batteries have a finite lifespan and eventually die. It's a common issue with all cars. The good thing is that you can replace the battery in all key fobs, without having to replace the entire case. Amazon sells replacement fobs that already have all the electronics in place. It is easy to pop the case open and replace the batteries. It's important to note that you will need to remove the emergency key first. you can accomplish this by inserting a small flathead screwdriver into the slot found in the middle of the case. The case will split as you move the screwdriver around it.
If you are about to replace the keys ensure that you have a spare, as this will reduce the total cost by a substantial amount. If you have an additional key, ask the dealer to cut it and program it for your car. This is much less expensive than purchasing a brand new key fob.
It is possible to add a second key to your vehicle in the event that you don't have one, but it takes some research and work. It costs around a hundred dollars to purchase a second car key. The computer of the vehicle must also be programmed. Professionals can accomplish this however, it's a costly option.
Replacement Ignition
In contrast to earlier Saab automobiles, the current SAAB 9-3 models are equipped with a much more sophisticated alarm system that is built around a coded key. If you lose your primary key, it can be costly to replace it with another one, as the car has to be equipped with a specific computer and also be programmed to accept a new key. Dealers can even charge hundreds of dollars to program an additional key if they are unable to complete the task.
If you've lost only one working key the dealer will replace your car's computer (known as the CIM or SAAB TWICE) in order to make a replacement, and will charge a premium for it. Instead we can reprogramme the EEPROM on your existing car computer to allow it to be programmed for an additional key, slashing over 50% of the price you have to pay at a dealership.
If you've owned a car like the SAAB 9-3 for many years and you're aware of the ignition keys are not very durable. If your ignition key isn't functioning properly, it is time to think about replacing it. They can become very sticky and the buttons are known to fall off. It's good to know that replacing the ignition key isn't as difficult as it seems and can be done in a short time using the appropriate tools.